Etched Foil Heater

heating(ce ul) Infrared flexible heating film infrared heating film, flexible heating, double-sided glue,heating Products

PRODUCTS SPECIFICATION: 

infrared heating film, flexible heating, double-sided glue, heating Products Manufacturer since 1996,

Polyester-imides film heater flexible heating element Performance capacity  1. Max. Thickness:0.3mm 2. Light weight, flexible, long life time: 30 years 3. CE ROHS compliance 4. Size: width 0.5cm-100cm length: 0.5cm—1000cm  Key Specifications of flexible heating element:    Product structrue :   

The Answer To Hundreds of Unique Heating Applications

Designed for Trouble-Free Performance and Improved Operation Efficiency

XHC ‘s Flexible Heaters are capable of operating with excellent performance under many adverse conditions, including: moisture,

 outdoor exposure or ambient temperatures, radiation, ozone, compression set, vacuum, fungus, oils, solvents, and many other chemicals.

Flexible Kapton Heaters also have very good mechanical properties. They are of low mass construction and provide rapid heat-up due to

 direct bonding to the part. Flexible Heaters are not affected by mechanical shock, vibration or repeated flexing and will not stretch or tear

over a temperature range of -392°F to +500°F (-236°C to +260°C).

Select a Flexible Heater for your specific application.

XHC Flexible Heaters are a reliable and economical heat source capable of providing uniform heat transfer to irregular shaped or flat

surfaces including three dimensional geometries, conforming to the part being heated.

Flexible heater use typically falls into the following applications:

Process Heat Freeze Protection

Condensation Protection . Composite Bonding

XHC’s engineering staff, with many years of experience in heat processing and temperature control, can assist you in designing the right

Flexible Heater for your application.

XHC's Flexible Heaters offer unlimited design possibilities!

Standard Flexible Specifications

Physical Size and Construction Limitations

Maximum Size:Dimensional Tolerance:Less than 6":6" to 12":Over 12": Nominal Thickness:Weight:Performance RatingsMaximum Operating Temperature:Minimum Operating Temperature:Physically Resistant To:Electrical RatingsResistance:Maximum Operating Voltage:Dielectric Strength:Standard Leads:

10" × 22" (25.4 × 56.9 cm)±0.030" (0.76 mm)±0.060" (1.52 mm)±0.125" (3.17 mm)0.006" (0.15 mm)1.5 oz./ft2 (0.05g/cm2)392°F / 200°C Continuous-320°F / -195°CMoisture, Ozone, FungusFoil: +10%, -10%480 Vac1000 Vac10" Teflon InsulatedStranded Wire

  

Flexible Heater Wattage Recommendations

		Step 1   Determine the Required WattageEvery process has a unique wattage requirement to heat that particular load up to temperature or to maintain a particular temperature.If the required heater wattage is not known, estimate the required wattage using the thermodynamic formulas listed in chapter 16, Engineering. A safety factor of 25% additional wattage is recommended to compensate for unknown variables.ExampleTo raise the temperature of an aluminum plate 6" × 12" × 0.5" (3.53 lb.) 200°F (from 70° to 270°F) in 0.5 hours:   Add safety margin 108 W + 25% = 135 watts     Step 2 Determine the Heater Size and Watt Density  A flexible heater should use the maximum space available for mounting and heating the process. Factors that affect heater size include the mounting method and watt density.

        Qulity control:     

Payment Terms :

Trade terms: FOB SHEN ZHEN

Payment Terms: T/T, Western Union,L/C are welcome.

 

Packing&Delivery:

Sample lead time:5 working days once we confirm the order or received payment.

Packing: Routine standard

    

After-sales:

We give 3 years warranty to our customers freely. Any quality problem, we will replace for free within 3 years.

Also, any accessories, we always support our customers.

Typical Applications:

Medical diagnostic instruments: Heat sample trays, curettes, reagent bottles, etc. Warm satellite components

Protect aircraft electronic and mechanical devices against cold at high altitudes Stabilize optoelectronic components

Test or simulate integrated circuits Enable cold weather operation of outdoor electronics such as card readers or

LCDs Maintain constant temperature in analytic test equipment

         

Warranty term:

Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period, XHC  will provide free

new products based on the proof-documents .If Failure or damage due to incorrect operation, wire connection, or anything other do not

follow our instruction,XHC will provide paid maintance within warranty period.

 

 

Welcome inquiry:

More concerned about our HEATING PRODUCTS, pls do not hesitate to inquiry now! For the heating film u need to tell me the size,

volt watt and if can offer drawing then better then can give u quotation.

 

 

 

Custom Engineered/Manufactured HeatersUnderstanding that an electric heater can be very application specific, for sizes and ratings not listed, XHC will design and manufacture a Flexible

 

Surface Heater to meet your requirements.

 

Standard Lead time is 5 to 15 days.Please Specify the following:

 

Diameter Wattage and Voltage Lead Type   Sensors or Thermostats Special Features or Cutouts Lead Location

        Skype:xhc-heater01

       We are at ur service 24 hours 

       We are looking for long terms cooperation  wholesalers, resellers, importers, agents worldwide!